Introduction
Resistive strain-gauge load cells are the core components of smart weight scales and body-composition scales. 65Mn manganese-steel half-bridge load cells represent the mainstream industry solution, divided into two major variants: G-Type and E-Type manganese-steel load cells.
They share identical material and measurement principles. Many clients mistakenly regard them as merely different in appearance. In fact, differences in the notch geometry of the elastic beam directly determine sensitivity, anti-eccentric-load performance, creep and temperature drift behaviour, which constitute key decision-making factors for ODM solution selection.
1. Fundamental Working Principle: G-Type and E-Type Fundamentally Alike
Both solutions adopt elastic beams fitted with strain gauges to form a Wheatstone half-bridge. The weight-sensing workflow is identical:
1. Load is applied to the scale platform, causing micro-metre-level bending deformation of the elastic beam.
2. Strain gauges bonded to the beam stretch or compress accordingly, generating tiny resistance variations.
3. The bridge circuit converts resistance differences into millivolt-level weak voltage signals. After ADC sampling, the MCU converts signals into weight readings.
Core discrepancies stem from notch shape, fulcrum position and flexible-section length of the elastic beam, which ultimately lead to differences in overall unit performance.
G-Type (Large-G) Load Cell
The G-type features a bent cantilever structure with longer flexible arms and concentrated deformation zones.
Under equivalent load, the elastic beam produces larger deflection, delivering stronger output signals and higher sensitivity. It provides excellent anti-eccentric-load performance to maintain stable readings under off-centre user stance, alongside superior creep and temperature-drift suppression.
E-Type (Small-E) Load Cell
The E-type adopts a notched rigid-beam design with shorter beam body and smaller deflection travel. It delivers compact structure and lower material cost.
It produces relatively low signal output and weaker tolerance against eccentric-load compared with the G-type. Standard E-type load cells are mostly deployed in entry-level weight scales and basic body-composition scales.
2. Multi-Dimensional Comparison Table
|
Comparison Item |
GType Load Cell |
EType Load Cell |
|
Structure Form |
Long cantilever bent Gshaped beam |
Short rigid notched Eshaped beam |
|
Sensitivity |
High, strong signal output |
Relatively low, smallamplitude signal |
|
AntiEccentricLoad Performance |
Excellent, stable readings under offset stance |
Fair, prone to reading drift under eccentric load |
|
Creep & Temperature Drift |
Wellcontrolled with ample performance margin |
Standard performance; insufficient margin for highprecision specifications |
|
Cost Range |
Relatively high |
Lower cost for standard versions |
|
Applicable Products |
Highprecision weight scales, highend bodycomposition scales |
Entrylevel weight scales, basic bodycomposition scales |
3. Selection Guidelines for ODM Design
1. For projects requiring strong anti-eccentric-load capability, wide-range temperature adaptability and long-term weighing stability, the G-type solution is preferred. It offers abundant native performance margin and lower mass-production-control pressure.
2. For cost-sensitive mid-range or entry-level projects prioritising quiet operation, low cost and compact structure, where stringent requirements for weighing accuracy and anti-eccentric-load are absent, the E-type solution is recommended.
4. Common Misconceptions
Misconception 1: G-type always performs better and should be selected for all projects
✅ Correction: Component selection requires trade-offs. For cost-focused projects with basic weighing requirements and no strict environmental or eccentric-load constraints, the standard E-type is a more suitable option. Neither design is universally superior.
Misconception 2: Rattling noise during shaking indicates defective load cells
✅ Correction: Noise originates from assembly clearance. Larger clearance must be reserved for G-type units to allow free deformation for high-sensitivity operation. Noise has no direct negative correlation with the load cell’s accuracy or stability.
Conclusion
G-type and E-type load cells operate on identical measurement principles; their differences arise from elastic-beam structural design.
Benefiting from its long cantilever beam, the G-type achieves higher sensitivity as well as improved anti-eccentric-load, creep and temperature-drift margin, making it suitable for projects demanding high stability. The E-type features compact structure and cost advantages, serving as a cost-effective, quiet-prone basic solution.
During pre-project ODM solution review, finalise selection based on client-specified accuracy targets, budget and operating-environment requirements. This is critical to smooth project delivery.

